How To Flash Micromax Bolt/Ninja A27

HOW TO FLASH OR SOFTWARE REPAIR MICROMAX BOLT/NINJA A27

Hello reader, welcome to seo blogger lab. Today i'm going to publish my second post here and the post about how to software repair or flash Micromax Bolt A27 or Ninja A27 but at first i'm going to introduce about my blog. Seo Blogger Lab is a electronics & programming knowledge based blog, here u can find latest mobile phone repairing tips, pc/laptop repairing tips, internet tips, latest gadgets news & many more. Now i'm going to tell you the flashing procedure.



**Warning: We are not liable for any damages which occur on your device. Read, understand and follow the instructions to avoid damaging your device. Do this at your own risk.**

• Requirements:

1. USB DRIVER    ( Password = seobloggerlab.com )
2. USB CABLE
3. FLASHING TOOL
4. FLASH FILE FOR BOLT A27 / NINJA A27

Download Micromax Bolt/Ninja A27 usb driver, flashing tool & flash file & follow below steps carefully.

1. Plug in your phone with your pc/laptop via usb cable & install downloded usb driver. It's better to restart the pc/laptop after installing usb driver.
2. If your phone has less than 30% charge take it to charge till it have More than 30%.
3. Now extract the downloaded flash file & flashing tool.
4. Now open the UpgradeDownload tool & click on the "Gear Symbol" Icon on the Top-Left of the interface...
   
5. Now, Navigate to the file "ze25paa_060.pac" Extracted Before and Click "Open".
   
6. Now check if the Text is displayed on Top Bar as shown Below & Click "Play/Start". You'll not see any changes in the tool untill you Plug in the device which we'll be doing next.
   
7. Now switch-off  the phone & plug in the phone with your pc/laptop using datacable.
8. Now, Press & Hold volume-down button until the Logo Pops-up & release the button (Will take upto 15-20 sec.).
9. Now the upgrade tool automatically detects the device & starts flashing it. You can see the process of flashing as given bellow.
   
   
10. After it's done, it displays status as "Passed".
11. Now unplug the device, remove battery, place it again and start the device it will take longer than usual to start.
12. Congratulations! you are done. You'll get back all ur factory apps & settings.

NOTE : Dont unplug USB cable or turn off your phone or PC or any other work that disconnect phone from PC untill flashing done !!!
If you face any problem in flashing then comment below or contact me. Please Share it on your network if i helped you.

Please Give Us Your 1 Minute In Sharing This Post!

SOCIALIZE IT →

Tweet

FOLLOW US →

SHARE IT →

Powered By: Blogspot Blog Tricks